Products

1GE+1FE+CATV+WIFI EPON ONU

Item No.: WK-2802CW
WK-2802CW terminal device is designed to meet the FTTH and triple play services needs of fixed network operators or cable operators.
  • WK-2802CW 1GE+1FE+WIFI+CATV IntroductionDownload
INQUIRY
Buy At AmazonBuy At AliExpressBuy At WishBuy At eBayBuy At Alibaba
Description Features Technical Parameter
1GE+1FE+CATV+WIFI EPON ONU is designed for fulfilling FTTH and triple play service demand of fixed network operators or cable operators. It meets telecom operators FTTO (office), FTTD (Desk), FTTH (Home) broadband speed, SOHO broadband access, video surveillance and other requirements. It is based on the mature stable, cost-effective Gigabit EPON technology, and has high ratio of performance to price, the technology of Layer 2/3, integrated CATV and configuration flexibility. They are highly reliable and easy to maintain, with guaranteed QoS for different service, and fully compliant with technical regulations such as IEEE802.3ah and technical requirement of EPON Equipment from China Telecom.
* Plug and play, integrated auto detecting, auto configuration, and auto firmware upgrade technology.
* Full compliance to IEEE 802.3ah specification & OAM function.
* Support 802.11n 2T2R speed up to 300Mbps.
* Support No-auth, WEP, WPA-PSK and WPA2-PSK function with AES, TKIP encryption.
* Support rich VLAN, DHCP Server and IGMP snooping multicast feature.
* Advantage traffic management
* Advanced Dynamic Bandwidth Allocation (DBA)
* The WAN port supports bridge / router mode.
* Advanced L2 features QinQ VLAN & QoS support.
* Support NAT, Firewall function.
* RF Video Output Bandwidth (MHz):45~1000, AGC Dynamic Range(dBm):-6~+2
* Support Console/ Telnet/ NMS management interface for ease of operation and maintenance.
* Support 2K MAC address table.
* Fully compatibility with OLT based on Broadcom/PMC/Cortina chipset.
Technical items Description
PON interface 1 EPON interface, SC single-mode/single-fiber, symmetric 1.25Gbps
Wavelength EPON Tx 1310nm, EPON Rx 1490nm, CATV 1550nm  
Optical interface SC/APC connector
RX sensitivity < -25dBm @ 1490nm
CATV interface SCTE F type
WLAN Compliant with IEEE802.11b/g/n, 300Mbps, 
2T2R One internal antenna and one external antenna
LAN interface 1x 10/100/1000Mbps  + 1x 10/100Mbps  auto adaptive Ethernet interfaces, Full Duplex / Half Duplex, AUTO-MDIX, RJ45 connectors
Indicators 11 indicators, for status of power supply, PON, LAN , POTS and CATV .
DC power supply +12V, external AC-DC power adaptor
Power consumption ≤12W
Operating condition Operating temp: -5~+55℃ 
Operating humidity:10~90%(non-condensed)
Storing condition Storing temp: -30~+60℃ 
Storing humidity:10~90%(non-condensed)
Net weight 0.45Kg
Review